The Lincoln Navigator is one of the chock-full SUVs you inspect on the highway. In that these vehicles are such a vast investment, cook up certain you care for up with the vehicle's basic prolongation, allied lubricating the hood (no Timber) fastening every 5,000 miles. The closest instructions are fit for 1998 and newer Lincoln Navigators.
Instructions
1. Disinfected the hood bolt on your Lincoln Navigator before you lubricate it. To cleanse your hood latch, rub down the exterior parts, dig elsewhere debris and grime begin inside the latch assembly and swab away the interior of the bar assembly.
2. Sand away any rust spots that have developed. You need to coat all the parts in the latch assembly with the lithium grease. To do this, activate the latch a few times to work the grease down into the latch.5. Test the latch.
Spray the areas affected by rust with WD-40 after you remove all the rust spots. This will stop the rust from spreading and will protect the area you just sanded from developing further rust damage.
4. Lubricate the hood latch on your Lincoln Navigator with your spray on lithium grease. Rust will look like flakes or a crust. It will be yellow, orange, red or brown in color.3.
Lubricate again if the latch is still sticking or making noise. Although the Navigator doesn't have a trunk, it does have a hatch. You can follow these same basic procedures to lubricate this latch, very, but if you have carpet, you may want to hoover it before beginning.
