Pin money a Turn Word in a Cadillac SRX
Turn off the engine of your SRX, and settle on the gloves.2. Abode the jack under the vehicle on the side you Testament be replacing the turn vocable lustrous. The filled manner should catch no enhanced than 20 minutes.
Instructions
1.The turn expression is an essential Element of the safety of your Cadillac SRX. Whether it burns gone, it should be replaced, at the moment. As the turn expression is contained in the lower turn expression meeting, you Testament occasion to remove the front rotate, in disposal to access the bulb. The Cadillac SRX uses 3157-type bulbs for the turn signals, which can be purchased at most automotive parts suppliers.
Loosen the plastic kernel covers with the revolve wrench, on the other hand do not remove them.
3. Raise the vehicle to a point at which you can comfortably remove the tire. Use the flat end of the wheel wrench to remove the wheel cover. Loosen, and remove, the wheel nuts. Remove the tire from the vehicle.
4. Use the socket wrench to remove the four bolts, holding the wheel well access panel in place. Remove the access panel.
5. Reach into the wheel well, and locate the turn signal assembly. Remove the largest bulb, by rotating it counterclockwise, and pulling it out of the assembly. Install the replacement bulb, and rotate it, clockwise, to secure it.
6. Reattach the access panel and the four bolts.
7. Place the tire back on the vehicle, and reattach the wheel nuts. Reinstall the cover and plastic nut covers. Lower the vehicle.
