Transform a Ford Vehivle Mirror
Aside from a cracked windscreen, a damaged rear-view mirror on either side of your automobile is one of the harder matters to disregard while driving. You entail the mirrors to safely guide your vehicle, and having damaged mirrors is not sole unsightly, however it can be downright embarrassing. But, instead of going to the dealership and paying an arm and a leg for labour, simply pick up a cutting edge mirror at the limited Ford parts branch and install it yourself.
Instructions
1. Receive the socket allot and remove the bolts holding the door panel on. There should be one in the pull stem nature and a rare others thanks to universal vicinity, depending on the year and example of your automobile.
2. Slip the trim pin Emigration object under the backside trailing string of the door panel and unseat the trim pin from the mounting gap in the door. Provided you discharge not keep a trim pin Emigration thing, you can employment a Numb putty machete, nevertheless be careful not to tear the door panel trim--or your own skin. Remove remainder of the door trim pins, good as you did the first.
3. Lift the door panel up and away from the door just far enough for you to arrive in and disconnect the wiring harness to your power lock and window switches. When you are done, or if you have manual windows and locks, simply put the door panel inside the van to keep it safe during remainder of the repair.
Reconnect the power mirror wiring harness at this time, if the mirror is powered.8. Reconnect the window lock and switch wiring harnesses, if so equipped, and put the door panel back on. If this is a power mirror, you will also want to disconnect the wiring harness at this time.
5. Move around to the outside and slide the mirror outward, away from the door until the studs clear the door holes.
6. Place the new mirror on the door by sliding the studs into the door holes in the opposite manner that you removed the old mirror.
7. Move back to the inside of the door and put the nuts back on the studs that hold the mirror to the door; tighten down.4. Remove the nuts holding the mirror to the door frame. You may need a deep-dish socket for this, as the nuts are on studs protruding from the back of the mirror.
You may need to smack the trim pins back into the holes by hitting the door panel directly over the trim pins with the side of your fist.
9. Clean the mirror with the glass cleaner and you are done.
