Friday, September 5, 2014

Create A Fleece Vehicle Bench Chair Cover

Covering seats in a vehicle serves two purposes: Seat covers can either protect seats from wear and tear and deposit them looking au courant, or camouflage seats that are showing signs of exercise. Whichever is your seat, you can dash off your own bench seat embrace. Fleece is an paragon essence for apply in forging a seat encompass due to it feels comfortable to sit on, it is durable, and any coarse edges can be left uncooked and achieve not hog to be finished.


Instructions


1. Degree the bench seat to be covered. Compose down the complete side-to-side length of the bench seat and the filled span of the bench seat, from the top of the back of the seat down the back and across the sitting earth to the backside front of the seat. Add an fresh 12 inches to Everyone measurement for the additional textile decisive for wrapping enclosing the back and sides of the seat.


2. Acquire Sufficiently fleece structure according to the measurements taken and reduce the fleece into a lot that fits the measurements.


5. Place the cover back back on the bench seat. Adjust it to fit exactly as you want it to fit.


4. Fit the seat cover onto the bench seat. Adjust the elastic to fit the seat cover onto the bench seat, making it tight enough to keep the seat cover in place. Pin this elastic adjustment to secure. Take the seat cover back inside and sew the elastic at the adjusted point. Then, sew the opening left in the casing closed.


3. Fabricate a casing for the elastic all the course of action on all sides of the contour of the fleece by folding under the edges 1 inch. Pin to secure, and sew the casing, leaving a miniature opening for inserting the elastic. Insert the elastic but do not cut it off yet. Mark the placement of the seat belts with a fabric pen.


6. Take the seat cover back off the seat and carefully make slits in the seat cover at the places you marked. With fleece it is not necessary to finish the raw edges of the slits.


7. Fit the seat cover onto the bench seat and pull the seat belts through the slits to finish the bench seat cover.