Brake rotors, besides confessed as brake discs, don't occasion to be replaced too ofttimes over the growth of your Toyota Camry. Remove the tire and trundle assembly and set aside. Next, unfasten the caliper mounting bolts.3.
1. Purchase brand-new rotors for your Toyota Camry at your limited Car parts store or composition them online. Nickels all of the rotors at the alike day for protected and yet braking performance.
2. Elevate your Camry on jacks and jack stands to bed it properly. Block the wheels to grasp it from rolling while you chore. When the wear down or satisfy warped, they can author your Camry to shudder and pulse when you hit the brakes. Provided this sounds according to your Toyota, then it's bout to obtain modern rotors. You can save means on the labour by doing the faculty yourself.
Instructions
Slide the caliper assembly and attached brake line off of the rotor. Hang the assembly safely out of the way with mechanic's wire. Be very careful not to disconnect the brake line at any point.
4. Remove the old rotor and then clean the area around the hub with a damp cloth to remove any debris or corrosion.
5. Install the new rotor onto the hub and tighten the holding screws with a torque wrench or an air ratchet with an appropriate adapter.
6. Discard the wire and mount the caliper assembly back into place. Tighten the caliper mounting bolts with a torque wrench. Replace the wheel assembly and tire and then move on and repeat this process for each additional rotor.
7. Lower your Toyota Camry, tighten and torque the lug nuts and then pump the brake until the pedal feels firm again. Test drive your Toyota to make sure that everything is in working order.
