Hand-bill saws can divide aluminium with the correct blade.
Aluminium has many uses nevertheless may want to be chop to the prerrogative vastness depending on its utilize. Cutting aluminium typically is done with tools such as cutting shears or by using a incision epigram. But, aluminium extremely can be reduce with a Hand-bill saying. Before cutting aluminium with a circular saw, determine what type of aluminum you need to chop, such as aluminum siding or an aluminum sheet.
Instructions
1. Place the piece of aluminum you need to chop on a pair of saw horses. Secure the aluminum to the saw horses with a clamp.
2. Measure the piece of aluminum with the tape measure. Place the front edge of the saw's foot (base plate) onto the aluminum workpiece. Press the trigger on the saw and allow the blade to arrive full speed, then slowly engage the blade into the aluminum.7.
4. Take the old cutting blade off the circular saw, and attach the carbide or aluminum cutting blade.
5. Adjust the depth of the saw blade to the thickness of the aluminum. If the blade is not deep enough, you will not have a clean cut.
6. Plug the power cord for the circular saw into an electrical outlet or extension cord. Make a mark with the felt tip marker where it will need to be cut.3. Place a straight edge over the mark, and make a cut line for the circular saw using a marker.
Continue pushing the saw slowly until you have cut through the aluminum.
