Expanded metal comes in many deviating shapes and forms, on the other hand no argument which one it is, it can be awkward and hard to chop. There are some facile ways to chop expanded metal prerrogative, on the other hand it takes a embryonic bit of age and creation.
Instructions
1.4. Remove the metal ruler and the clamps from the metal.5.
You want this to be exactly along your new mark.
3. Mark the metal along the ruler using a permanent marker. This is going to be your cut line, so use the tape measure to make sure the measurements are accurate.
Degree the expanded metal to site the earth that you thirst to chop. Provided viable, it's easiest to chop the metal along the joints where it comes together, but it's not critical.2. Clamp the metal ruler to the expanded metal using the clamps, and put it along the measurements you just made.
Place the expanded metal onto a raised surface so that your cuts won't go into the concrete or other work surface.
6. Put on the safety glasses and hold the grinder securely and steadily in both hands.
7. Turn on the grinder and begin to chop the expanded metal. The grinder will throw a lot of sparks, so make sure your eyes are protected. The key is to chop along your marker line while keeping the grinder secure. Each gap in the expanded metal will cause the grinder to move forward, so keep a steady hand as you work down the metal.
8. Continue cutting until you reach the end of your marks. The metal will separate and the job is complete.
