Friday, February 6, 2015

Remove Vehicle Door Molding

Cars come with lots of features that not Each likes to end.1. Grounds the vehicle out in the sun and let on it to heat up for at least an generation. This will free up some of the molding on the body and make it easier to bend.2.



Select machine mouldings, For instance. They're on the machine to protect the door from door dings, nevertheless some gaze further gaudy. Happily, it's not too arduous to remove the mouldings, and it can be done quite easily in an afternoon.

Instructions


Start persist of the molding and heat it up using the heat gun or hair dyer. If you're using a heat gun, put it on a low setting so you don't bubble the paint, and move the gun frequently.


3. Place the plastic putty knife between the molding and the body and start to pull the molding off of the vehicle. As soon as you can get your hands on it, pull the entire molding back and off of the vehicle.


4. Insert the eraser wheel into the drill and set the drill to a low setting. If you try too fast, you'll burn the paint.


5. Apply the eraser wheel to the leftover tape using the drill. This is going To hull off any residual adhesive off of the paint, and if you use it at a slow speed, you'll get it all off without damaging the paint.