Friday, February 6, 2015

Cut Window Glass

While cutting window glass is not onerous, it does returns training. Many tribe build the blunder of trying to scratch extremely deeply into the glass, or running the glass cutter over the equivalent limit multiple times. As for tools, there are two types of glass cutters on the market--a no problem steel revolve and a diamond-chip-coated cutter. Either type Testament chore, although many novice glass cutters good buy that the diamond cutter is slightly easier to account. The trick to cutting glass is to lay dispassionate the ethical proportions of vigour on the cutting wheel and to pull the cutting shove across the glass smoothly and at an much rapidity. The consummation of the actual breaking of a scored lot of window glass depends on the condition of the scratch you annex fictional besides as the bigness of the glass. With a bantam knowledge nearly anyone can abbreviate like a pro.


Instructions


1. Lay your glass sheet on a smooth, clean, level surface.


2. Use caution as the edges of the glass can be very sharp.7. Rub your whetstone lightly along the cut edges of the glass. Round the sharp cut edges slightly to increase the strength of the glass extremely as to make it safer to hold.



4. Grasp your glass cutter as if you were holding a pencil. Angle the cutter just slightly so the cutting wheel touches the glass where you wish to make your cut. Start at the very edge of the glass and draw your cutter all the way across to the other edge of the glass with a moderate amount of pressure in one smooth, even motion. There should be just a slight scraping sound as the cutter scores the glass.


5. Place the 1/4 inch dowel under the glass, directly under the scored line.


6. Wearing your eye protection and gloves, apply a sharp downward thrust to the glass on either side of the dowel. The glass should snap cleanly along the score. Dip the tip of your glass cutter into kerosene for a smoother cut.3. Lay your T-square to the straight edge where you want your cut made. Hold the straight edge firmly to the glass.