1999 Chevy pickup trucks, such as the Silverado, are manufactured even passion the related Tahoe and Sierra; the engine type can repeatedly be the one antithesis. Installing a starter Engine is essentially the duplicate transaction for any of these vehicles, with by oneself a sporadic slight variations depending on the engine. A bad starter Engine is foremost to ensuring the engine Testament properly launch without an Exorbitant empty on the battery. Installing a starter normally method inaugural removing the early one.
Instructions
1. Disconnect the Motor lorry's antagonistic battery cable.
2. Raise the truck's front end onto jack stands. Reconnect the splash shield, lower the truck off the jack stands and reconnect the battery cable.
Disconnect the electrical connector for the oil level sensor.
4. Remove the current starter's mounting bolts and (on a V-6) move the starter forward and remove the bellhousing cover.
5. Lower the starter; detach the transmission cooler lines from the oil pan and move them away if needed. Disconnect the solenoid's wires with a wrench and remove the starter.
6. Raise the new starter into position and fasten it with its bolts. Connect the wires to the solenoid terminals.
7. Reconnect the transmission cooler lines if needed -- don't bend or kink the lines -- and reinstall the transmission bellhousing cover and the solenoid shield.
8. If the truck has a splash shield, unbolt and remove it with your wrench.3. Unbolt the single bolt on the transmission's bellhousing cover and remove the starter solenoid's shield; this is needed on a V-8 engine.
