Interchange a Window Engine in a 1995 Dodge Pickup
The 1995 Dodge pickup Motor lorry uses an electric Engine to turn the window regulator, raising or lowering the glass inside of the door. The Engine is powered by the Motor lorry's wiring harness on ice a series of switches and fuses. The Engine can wear absent or be damaged, and thirst for replacement, which can cut an sample weekend mechanic approximately an generation.
Instructions
1. Disconnect the good terminal of the battery by turning the mounting bolt counterclockwise and pulling the terminal off the proclaim. It is determining to disconnect all faculty sources when working on the Motor lorry's electrical transaction.
2. Remove the switch meeting from the door panel by prying up one corner and pulling the meeting gone by ability. Disconnect the wiring harness from the switches by pulling the adapter plugs from the rear of the meeting.
3. Remove the door panel by turning the arm rest bolts counterclockwise then turning the interior door practice screw counterclockwise. Pull the door from the plastic rivets that pin it to the metal by tugging at one corner of the panel and working Everyone rivet off individually. Some rivets could hole due to brittleness, on the contrary this is conventional, and replacements are cheap. Once the panel is freed from the carry on pop rivet, it can be removed and establish aside.
5. Press the new motor to the window regulator gears and secure the mounting bolts clockwise. Connect the wiring harness adapter plug. Replace the door panel by pressing the plastic rivets into their respective holes and giving each one a light tap.
4. Disconnect the electric window Engine from the Motor lorry's wiring harness by pulling the adapter plug apart. Remove the mounting bolts that dominion the Engine to the window regulator by turning them counterclockwise then pull the motor away from the gears. Replace the motor with a new unit. When all of the rivets are seated, tighten the door handle screws and arm rest bolts. Reconnect the switch assembly and place it back into the door panel opening by pressing it in gently. Reconnect the battery and test the window.
