You pay for in your 1997 Saturn and fling to begin it.5. Put the new starter into place and tighten the bolts with the socket and ratchet. You will find it easier to receive the bottom bolt in first and then leave it loose while you get the top one started.6. Whether you select it to the garage, though, you Testament simply be wasting bread on big labour costs, now you can exchange the starter yourself and it Testament isolated select an generation or two to Stop the activity.
Instructions
1. Disconnect the refusal battery cable by loosening the nut with a wrench and place the wheel chocks behind the rear wheels.
2. Raise the car up with the automobile jack and place a jack stand under the frame near the jacking point. Raise the jack stand up to the frame.
3. Spray the wires on the solenoid with the penetrating oil. Remove the wires from the solenoid using a wrench to carefully loosen the nuts.
4. Remove the bolts from the starter using a socket and ratchet along with an extension for the top bolt. Remove the starter from the engine.
All you're getting is a speedy clicking sound when you turn the principal on. The cusp Conclusion is that you necessitate to interchange the starter. You can discharge it yourself or you could appropriate it to a garage.
Reconnect the wires to the solenoid and tighten the nuts with a wrench. Remove the jack stand from under the frame of the car and lower the car back to the ground.
7. Reconnect the battery terminal and start the car to test the installation.
