You can transform the windscreen on your '93 Ford Convoy exactly Homewards, saving yourself day and capital. Your windscreen serves a high-priced work, and it's crucial to interchange it provided it becomes chipped or cracked. Replacing the windscreen is not hugely ambitious, on the other hand you must arrange it exactly so that it continues to protect you properly. To save some means, you may be able to get a used Ford Escort windscreen that is in excellent process from your regional Car wrecking yard.
Instructions
1. Detach one of the replica screws on the rear prospect mirror and slide the mirror away.
2.8. Position the windshield in the windshield opening from outside the Ford Escort, taking care To admit the loose rope to hang inside the car.9.
Subsume all the vents on the dashboard with painter's tape to prevent pieces of glass from falling into the vents and blowing away following when you turn on the air.
4. Cut out the rubber gasket all the way around the windshield with a razor knife, taking care not to touch the glass. Push the glass out from inside the Escort. Have a helper catch the glass from the other side.
5. Clean off the frame, the dashboard and the new gasket with a wet cloth. Place the new gasket in the sun to soften it and make it more moldable.
6. Put a thin layer of sealant on the bottom part of the gasket's half channel. Fit the gasket onto the windshield, making sure the side with the slit is on the part of the windshield that will be facing outside the vehicle.
7. Put petroleum jelly in the outer groove of the gasket. Place a heavy 1/16-inch nylon cord around this groove, starting at the bottom center of the windshield and going all the way around. Start with 1 foot of cord hanging out as you begin and end with another foot of rope hanging down.
Lift up the windscreen wipers and pry up the model with a flat-head screwdriver positioned between the devotee and the arm. Rock the arm of the windscreen wiper with your other ability to remove Everyone windscreen wiper.3.
Pull the cord slowly out of the gasket from inside the car all the way around the windshield. This will put the rubber gasket in place. Have your helper press the rubber gasket to the outside of the windshield frame as you pull from the inside so that the gasket doesn't slip off. Allow to cure for Day and night.
