The Fiero sits rather low to the ground. This low centre of gravity gives the Fiero admirable handling, however and makes it prone to a parcel of stone chips. These petite cracks can quickly spread, and when they impress to be larger than an inch in length, you require to alternate the windscreen or you risk the abundant windscreen shattering. Once the windscreen has been removed, installing a windscreen on a Pontiac Fiero is quite straightforward. On the other hand, dash off certain that you go next a particular procedure so that the glass Testament properly adhere to the frame.
Instructions
1. Fair out any residual urethane on the windshield window frame. Cut the old urethane down to approximately 3 mm.
2. Clean the pinch weld area on the sides of the frame with a brush. Make sure that there is no remaining debris.
3. Coat the frit band with urethane primer. Allow the urethane to cure for at least 12 hours.
Run a thick bead of urethane around the perimeter of the frame where the windshield will go. Use the 3 mm of remaining urethane as a guide.
5. Align the top, bottom and sides of the windshield on the Fiero's frame and press the windshield into place. The frit band is the black edging on the glass. The primer opens the pores on the frit band and allows it to adhere to the urethane.4.
