Brake caliper mounting bracket
During the advance of changing CD brakes on any vehicle type, you must compress or collapse the brake caliper. The brake caliper is the piston cylinder in the centre of the brake caliper mounting bracket. The caliper is the mechanism compelled for the handle of the brakes to the spin. When the brake pedal is pressed, force in the brake lines presses the caliper against the brake pads and in turn they grind against the rotor to slow down the machine.
Instructions
1. Loosen all of the lug nuts on the rear tires with the tire iron. Berth the wood blocks in front of the front tires to nourishment grip the van from rolling.
2. Deposit the jack under the rear axle of the machine and hoist it until the tires are off of the ground. Place the stationary end of the tool against the rear of the mounting bracket and the movable piece against the caliper cylinder. Compress by tightening the tool until the caliper is flush with the base of the bracket.
The mounting bracket is the half-moon shaped metal bracket on the rotor that is revealed when you share off the tire.
4. Research to gawk provided there is a groove across your caliper cylinder. Whether there is a groove, you Testament desideratum to adoption the compression stuff. Provided there is no groove, you Testament entail to use the C-clamp. Both tools work the same way, but the compression tool has a special attachment to rotate while compressing.
5. Fix the jack stands under the rear axle for backing. Remove the tire.3. Remove the two bolts that clinch the brake caliper mounting bracket on to the rotor, with the socket wrench.
