Disinfected Glaze Off of Brake Rotors
This article Testament panoply you easily remove it!
Instructions
1. Remove the spin from the machine and be definite that you cause jack stands to control up the vehicle weight.Your brake rotors are a actual exigent component of the braking step owing to the discs rely on a Disinfected and smooth rotor surface when busy to brick wall the vehicle quickly. Glaze on the rotor surface can surely discourage your stopping faculty. Whether any glaze has accumulated on your rotors you longing to receive rid of it genuine out. Decent using a rag trying to rub it down Testament not assignment in that the glaze develops a rigid surface.You close not keep to remove the rotor to remove the glaze.
2. Wrap the 1500 grit sandpaper tightly over the sanding block.
3. Lightly and evenly sand the rotor surface turning the rotor as you bang along to be firm that you along so you are undeniable to sand the full disc. Do not use much pressure here to avoid scratching the surface. Much better to go over the same area numerous times rather than sand hard all these days.
4. Wipe off the rotor surface with a clean cotton rag to remove any sanding dust . Now using the 2000 grit sandpaper wrapped around the sanding block sand again to insure that you will have a very smooth surface on the rotor. The last thing you want is to scratch the rotor surface with the sand paper and sanding is best accomplished using a flat block rather than just using your fingers behind the paper to avoid uneven sanding.
5. Put your safety Glasses on to protect your eyes from splash back and spray the rotor surface with Brake Kleen. The cleaner is meant to air dry on it's own so it will not be necessary to wipe it off.
6. Check that all the glaze has been removed visually and also by feeling with your hand. The rotor should be smooth and glaze free. If any glaze remains continue sanding and spraying with Brake Kleen until you are satisfied. All areas of glaze need to be removed to insure smooth braking.
