The Chevrolet S-10 has been usual owing to it came absent in the '80s, however with popularity can come some drawbacks--such as thieves. It is graceful manageable for someone to rent into the S-10 Motor lorry using a flat-head screwdriver in the door handgrip. However provided you demand to set your Motor lorry after a break-in, it Testament hire a bit of hour. In this event, the vehicle is a 1999 S-10, on the other hand the operation is the alike for other caducity extremely.
Instructions
4. Unbolt the handle from the door using the open-end wrench.5. Remove the grommet in the top of the door panel using the flat-head screwdriver.
2. Pull the panel off the door by prying under the panel and pulling. Clips hold the panel in place.
3. Reach inside the door and disconnect the linkage that goes to the handle. There are little clips on the linkage that twist off and allow the linkage to fall out of the hole.
1. Unbolt the door panel from the door using the 1/4-inch ratchet and sockets. There is a bolt under the armrest and on the bottom of the panel.
This will give you access to the bolt behind it.
6. Unbolt the handle from the door using the 1/4-inch ratchet. Then remove the handle from the door.
7. Install the replacement door handle in the reverse order of disassembly.
