A dent in a steel door can compose the overall appearance of the door attending fortuneless. A wire trundle is a coarse brush that attaches to a grinder or electric drill. It is specifically designed for removing distemper and other materials from steel surfaces. You can as well appropriateness a 60 or 80 grit sandpaper to remove the tint.2.
Instructions
1. Remove the dye a couple of inches sorrounding the dent using a wire circle. Regardless of how the dent was settle in the door, removing the dent Testament correct the overall appearance of the door. Although steel is a heavy-duty metal, it is feasible to remove a dent from a steel door. You can remove the dent from the door while the door is all the more attached to the hinges, however it is example to unhinge the door and assign it gone on sawhorses.
Alloy up a batch of Car thing filler. Put a scoop of resin on a scrap collection of plywood. Add the hardener to the resin and alloy thoroughly with a putty lancet. You can obtain auto body filler at most internal improvement or hardware stores.
3. Fill the dent by dipping a Broad putty ripper (generate persuaded the putty knife is wider than the dented area) into the auto body filler mixture and smoothing it onto the surface of the dent. The filler will harden rather quickly so you have to work fast.
4. Smooth out the filler over the dented area. Do not leave ridges or humps in the filler. Be sure not to overfill the dent and do not try to even out the filer once it has begun to harden. You can add another layer of filler once the first coat hardens, if necessary.
5. Sand the filler smooth with a 100 grit sandpaper once it has completely hardened. This generally takes approximately 30 minutes.
6. Apply a primer and repaint the entire steel door.
