Add a TV tuner to your machine's video operation and your passengers can stopwatch regional broadcasts while you conduct your eyes on the method. You can dissemble the tuner anywhere in your vehicle and government it with an infrared remote driver's seat. Plug the antenna wire into the antenna input of the tuner.8. Reattach the battery cables and start your car.
You must connect some tuners to video Accoutrement of the alike Trade-mark for the units to occupation properly.
2. Extended your motorcar's hood and manipulate a wrench or socket to disconnect the battery cables from the battery. Evaluation the machine's repair volume for the exactly immensity thing.
3. Decide where you demand to mount the TV tuner. Choose a spot where it won't impress hit or crushed-many humans settle it in the Timber or under a seat. Application the mounting brackets and screws that came with the unit. You may admit to drill holes for the brackets.
4. Route the TV tuner's function wire to the fuse block (the tuner is powered by your automobile's 12-volt dynamism supply). Connect the power wire to an accessory power output in the fuse block. Check the car's repair manual or owner's manual for accessory output locations on the fuse block.
5. Attach the tuner's infrared "eye," or receiver. Choose a spot where the eye will be accessible to the IR remote control. Follow the manufacturer's instructions for installation.
6. Route an A/V cable from the tuner's video output to the monitor's video input. Connect the cable securely for the best signal.
7. Mount the antenna (if your tuner came with one) on the windshield and route the antenna cable to the tuner. Here's install one.
Instructions
1. Jewel outside which TV tuner is compatible with your video operation.Turn on your video system and use the remote to turn on the TV tuner. If you installed the device correctly, you'll receive local TV stations.
