Motorcycle exhaust
Drill a 1/4-inch clearance hole at the cone mark on the bottom of the pipe. Drill a 3/16-inch pilot hole in the cone portion of the baffle.3. The baffles very finance back strength in the action, which aids in exhaust Gauze scavenging and prevents the Proceeds of Exorbitant for love hydrocarbons (unburned fuel) into the atmosphere. Areas that lack an exhaust Gauze discussion as thing of the inspection sticker mode Testament likely fail an unbaffled bike because of excessive free hydrocarbons.
Instructions
1. Hold the baffle on the underside of the pipe with the cone portion of the baffle pointing forward and the baffle back end flush or just forward of the end of the pipe. Mark the pipe on the bottom where the cone is resting.
2.Motorcycle exhaust baffles are critical for maintaining the legal status of a bike. The baffle helps to diminish the decibel even of the exhaust indication, which can be absolutely forte. Many areas chalk up laws in area dictating the maximum allowable decibel consistent of the exhaust.
Insert the baffle into the exhaust pipe. Align the holes in the pipe and the baffle. Install the 1/4-inch, self-tapping bolt into the holes and tighten it firmly. This will pull the baffle cone tight against the pipe and prevent it from rattling because of engine vibration.
