Automobile door pins comfort ally doors with the frame.
A sagging door is one headache with a 2002 Chevy GMC Motor lorry. This is caused by degradation of the door pins, the cylinder of metal holding the two hinge pieces well-adjusted. When replaced with contemporary hinge pins, the door Testament place properly inside the frame. It closes easier and the lock no longer bangs against the lock.
Instructions
1. Disclosed the door and levy a immature Chair under the backside of the door to aid it.
2. Remove the backside reminiscence spring on the door hinge with a pry bar by prying it up and outside from the hinge.
3. Contain a Spike punch into the backside of the hinge under the door pin and tap the punch with a hammer to push the door pin up and gone of the hinge. Grasp the top of the pin with a duo of vise grips and daily grind the pin elsewhere of the door frame. Use the pry bar to pry these out if necessary.5. Remove the bushings, which are small round plastic washers, from the replacement kit. Place one into the top of the hinge hole and gently tap it into place with the hammer.
Gain a helper clench the door during this process.4. Remove both bushings from the door hinge with the nail punch and hammer.
6. Slip a new hinge pin into the door hinge through the bushing. Make sure the bottom hinge hole is lined up with the top hinge hole.
7. Tap the pin through both hinges with the hammer until the pin slides through both hinge holes and into the bottom bushing.
