These are Bull!
Cook your 26" bike (Thats been sitting in the garage), motorized. One of my co-workers asked me to facilitate him with this project. With these outrageous Gauze prices, it is generation for we the typical to begin changing to alternative resources of transportation. This one is in fact cost the value.
Instructions
1. There is a quota of data on this ball-breaker, so I Testament convey you mostly the basics here and Testament Link you to amassed definitive sites.
There's 2 sizes of the engine to select from. 40cc, ($179.00) and the 80cc ($179.95) They are on sale appropriate these days. (At the lifetime this article was written)
2. These engines are Unmarried cylinder, air-cooled, 2-stroke. You homogenize the oil and Gauze even cognate a weed eaters fuel. When you bias your tools, constitute decided your bicycle has Sufficiently amplitude to sit the Engine on the frame. From the seat tube, you occasion 14"-15" and 5" for diameter. These Gauze engines accept more room than the Electric, or Battery operated ones.
3. When you get everything all put together, you get on your bike, start peddling, pop the clutch and Ta Da. You have a motorized bike.
When you attach your motor to the frame, Do not forget to put the rubber in areas between most of the parts. Make sure you get it good and tight. The rubber helps to protect your bike, and help with some of the vibration.
5. You install the throttle, clutch and kill switch, (it all comes together) to your handlebars. The wiring is very easy also, there are 2 wires you connect, they are color coded, you just match them.
6. There is only one way to put the sprocket on. I found the chain to be the hardest. Because you have to find the master link and punch it through; you can take it someplace to weld it if you have a hard time. The muffler gets really really hot, so make sure it's out of the way.
7. When you receive your kit, Open, and lay out all the parts so they don't get lost.You can start with something easy like installing the Gas Tank. You will have to install the petcock onto the tank, and the choke and carburetor are pretty self-explanatory. Be sure to put the carburetor in the correct position. The tank and gas line feed downward into the carb.4.
