Drilling the baffles of your Yamaha increases the exhaust sound.
There is a mounting bolt between the two mufflers which attaches the exhaust to the frame, too as bolts which mount the mufflers themselves to the exhaust pipes.2. Assign the mufflers on a endeavor bench and then secure them into settle with clamps.
Instructions
1. Remove the inventory mufflers from your V-Star by inceptive unbolting it from the exhaust tube and the frame of the motorcycle with the socket wrench.The cool bag to exchange the existing exhaust action on your inventory Yamaha V-Star is to chop the baffles elsewhere of the sound deadening muffler. Replacing the exhaust manner can be prohibitively expensive, expressly when you examine that cutting and drilling the baffles on your bike could worth you goose egg deeper than an afternoon in the garage. While drilling the baffles on your exhaust is a universal customization, acknowledge how comfortable you are with a crashing motorcycle before you drive.
Inside the extreme of the muffler, there is an inner tube, and then a metal plate surrounding it. The inner tube is the exhaust tube. The metal plate is the exhaust baffle.
3. Exercise the metal grinding bit to remove the welds which attach the metal baffle to the exhaust tube, being careful not to heat up the metal.
4. Area the gap epigram into the electric drill chuck, then centre the counselor drill located in the centre of the gap adage into the centre exhaust cylinder so that when you engage the drill, you Testament divide a Disinfected line in the baffle around the exhaust pipe.
5. Remove the cut baffle from the exhaust pipe. Behind the baffle, there is fiberglass or steel wool stuffing. Use a pair of needle nose pliers to pull the stuffing out of the exhaust canister.
6. Insert the extended length drill into the electric drill. Behind the stuffing, there is another baffle, but this baffle helps to support the muffler onto the exhaust pipe and should not be removed. It can, however, be drilled. Use the electric drill to drill several holes in the baffle. The more holes you drill, the louder the exhaust sound will be.
7. Bolt the finished mufflers back onto the exhaust pipes of the motorcycle, being careful to replace all mounting bolts for mounting the mufflers to the the exhaust system, further as mounting the exhaust system to the frame of the motorcycle.
