Monday, December 21, 2015

Make Parking Brake Changes Inside A Pontiac Grand Am

Adjust your Pontiac Grand Am parking brake easily using a pliers.1. Pull up on the parking brake lever by participation until it clicks three times. Place the parking brake lever inside the vehicle between the Chauffeur seat and the front passenger seat. Adoption this procedure for Pontiac Grand Am caducity 1985 on ice 1993 and 1999 to 2005.


Instructions


Years 1985 to 1993


Impress underneath the van to constitute this mild reconciliation. Save yourself lifetime and capital doing the accustoming Homewards instead of bewitching your machine to the mechanic shop. Accomplish the accustoming when your automobile starts to slip down the hill when parked on a slope.


2. Elevate up your Pontiac Grand Am rear wheels. Utilize your jack and facilitate the rear wheels with the jack stands.


3. Locate the parking brake cables underneath the car, coming from both rear wheels. They are coated wire cables. Spray the cables with penetrating oil. This prevents damage to the cable and to the adjuster nut.


4. Use your pliers to hold the braking cable and use another pliers to adjust the nut. Test the adjustment and spin the rear wheels around. Keep adjusting the nut until you can just spin the rear wheels backward and not spin them at all forwards.


5. Take off the parking brake and test the wheels for full rotation backwards and forwards. Lower your Pontiac Grand Am using the jack and removing the jack stands.


Years 1999 to 2005


6. Apply and release the parking brake five times. Verify the parking brake lever releases completely by turning on the ignition of your car and verifying the parking brake light does not turn on.


7. Pull up on the parking lever to four clicks. Raise your cars rear wheels with a jack and and support the wheels with the jack stands. Verify the rear wheels cannot be turned.


8. Release the parking brake and verify the wheels can spin freely. Lower your car using the jack and remove the jack stands.