When you are underneath your machine preparing to remove the muffler, you Testament message that the cylinder joins well-balanced with clamps. These are muffler clamps which can seem almost impossible to remove. Precipitate, snow and heat reason rust to accumulate approximately the clamp threads which makes the nuts nearly be remodelled a solid component of the clamp. Before you cleft elsewhere the hacksaw to chop the cylinder at the clamp, handle a mode that mechanics convenience to remove these clamps.
Keep turning until the nut twists off and breaks the end of the clamp. Watch the placement of your hands, when doing this, because the nut will break off with force. Attempt to keep your hands pointing towards flat portions of the frame and muffler and not sharp areas.
Berth the tip of a flat head screwdriver on the side of each nut and tap the handle of the screwdriver with a hammer. Apply more penetrating oil and allow the oil to soak for an hour.
2. Turn the nuts counterclockwise with a wrench to remove them from the clamp if the penetrating oil loosened the rust sufficiently.
3. Place a socket wrench over the nut if the penetrating oil did not work. Put on a pair of leather gloves to protect your knuckles. Turn the nut counterclockwise with the socket wrench.
