Dodge casts the engines of the Dakota using sand. The sand is packed into a mould with a void inside that matches the engine, and the pathways on ice the sand remit the molten iron to flow environing, completely filling the mould. The openings to these pathways eventually cast the freeze plugs. After the engine is lob, the sand is removed fini these holes and they're capped with "freeze plug" expansion joints. The appellation was obsessed by reason of freeze plugs are designed to fail before the engine cracks provided the coolant ever freezes.
Cut the plug outside with the pliers. Sometimes freeze plugs enjoy corroded inside the freeze plug gap. Provided this happens, punch a gap in the centre of the freeze plug with a small screwdriver and pry it out.4. Rub the emery cloth around the inside of the freeze plug hole To cleanse it. Remove any residue or dirt.5.
2. Situate the drift on the freeze plug toward the side and tap it with the hammer. The plug should turn inside the freeze plug gap.
3.
Instructions
1. Buy under the Motor lorry and void the coolant by removing the filter plug with the adjustable wrench. Empty the coolant into a pan and settle aside. Modify the empty plug.Coat the sides of the new freeze plug with sealant. Gently insert the freeze plug into the freeze plug hole. Hit it around the edges with the hammer, using gentle pressure to seat the freeze plug completely into the freeze plug hole.
6. Fit the sealer head into the freeze plug. The sealer head is designed to fit closely and will push the freeze plug into the block until it is a sixteenth of an inch below the surface of the plug.
7. Replace the coolant and start the engine. Check for leaks.
