You may want to bang to a exceptional Car yard to good buy Chevy Lumina glass
Whether the window glass in your ancient Chevy Lumina is cracked or broken, you necessitate to moderate it. Bag carry on caution and application protective gear when replacing broken glass. The glass in a 1993 Lumina is also difficile to remove and alternate than on newer Chevy models over rivets are used to mount the glass within the door. This Testament have need other tools that you must too cause caution with while using.
Instructions
Removal
1. Disconnect the annulling battery cable provided the door has endowment windows or locks.
2. Pry off the authority lock and window controls from the door (provided the motorcar is equipped with them) using a trim belongings and disconnect the electrical connectors. Or, unclip and remove the door knob with a earmarked baggage or by rubbing a rag endure the handgrip.
Unscrew and remove the lower gallop channel with a wrench or screwdriver. Pull the outer sealing strip outside of the top of the door.6. Drill out the rivet for the window run channel and remove it from the door.
Unfasten all the trim-panel retainers and then pry the panel carefully at the window seal to detach it from the door.
5. Remove the front and rear enhancement mouldings from the door.3. Remove the door-handle bezel and then remove the fasteners in the lower panel and armrest with a screwdriver. Detach the electrical connectors, whether any, and food them finished the door panel.4.
Drop the glass out of the rear run channel and then pull it up and out of the door.
Installation
7. Install the window within the door frame. Bolt the window run channel in place with a small bolt and wrench, or rivet it in place with a rivet gun.
8. Re-install the lower run channel with its screws, the outer window sealing strip and the garnish moldings.
9. Attach the trim panel to the door; place the window seal part over the door frame. Apply the fasteners in the lower panel and armrest.
10. Clip and install the door-handle bezel and the window handle or the power lock and window controls.
11. Reconnect the negative battery cable if needed.
