You can acquire MIG welding whips that are up to 25 feet in length.
A metal inert Gauze (MIG) welding machine utilizes a gun meeting behind of a cord, called a whip, washed-up which inert Gauze, electricity and welding wire are fed. This welding whip is removable and can be replaced with a longer cord for in a superior way projects or with a specially lined tube for adoption in welding aluminium. Removing and replacing a welding whip can be done without distinctive tools and in a infrequent light steps.
Twist the wire spool to reload the MIG wire onto the spindle. Be careful not To admit the tension to relax while re-spooling the wire, or else it Testament tangle and change into unusable.8. Secure the wire onto the spool with a rubber band.
2. Turn off the MIG welding computer and unplug it from the capacity source.
3. Shorten the latest inch of welding wire off from the point of the torch using wire cutters.
4. Conduct the side access panel of your welding pc.
5. Pinch the MIG wire between your left index finger and thumb at the end where it enters the wire feeding meeting. This Testament prevent the wire from releasing its tension as you effect to re-spool it on the wire spindle.
6. Lift the tensioner arm covering the wire feeding meeting.
7.
Instructions
Removing the Welding Whip
1. Squeeze the welding gun trigger to expel an inch of welding wire from the gratuity of the torch.9. Unplug the welding whip's wire coupling from the socket on the face of the welding pc.
10. Pull the welding hose elsewhere from the faceplate of the welding mechanism to Stop removing the welding whip.
Installing the New Welding Whip
11. Incorporate the current welding whip's hose into the faceplate of the welding engine and plug the wire coupling into its socket.
12. Compass a spool of MIG wire onto the wire spindle inside the engine.
13. Pull the MIG wire through the wire feed assembly and through the back of the faceplate into the welding hose.
14. Lower the wire tensioning arm to add tension to the MIG wire.
15. Close the access panel to the MIG welding machine.
16. Turn the welding machine on and pull the trigger on the welding gun to feed the MIG wire through the whip and out the tip of the welding torch.
