Friday, October 17, 2014

Safeguard Vehicle Battery Posts From Corrosion

Protect Vehivle Battery Posts From Corrosion


Corrosion on vehivle batteries can brew the vehicle more and more arduous to begin, until it won't inception at all. The corrosion appears as a caucasian or developing build-up approximately the terminal posts--the posts on the top or sides of the battery, where the cables connect--and as a melanoid build-up on the posts themselves. Protect the vehivle battery posts from corrosion by child's play prolongation with minimal investment of interval and expense.


Instructions


1. Disconnect the battery cables from the terminal posts. Disconnect the adverse (-) cable anterior and then the affirmative cable (+).


2. Sincere the H2O reservoir located on the top of the battery, unless it is a no-maintenance battery, which does not lack fresh soak. Fill with doctor to the fill borderline in that batteries that are low on saturate corrode quickly.


3. Alloy a thought of Identical parts baking soda and inundate. Applicability a toothbrush to scrub the corrosion off the battery casing and the terminal posts while taking care not to receive any of the solution into the vents on the top of the battery.


4. Clean the corrosion off of one terminal post at a time, using a stiff wire brush, sandpaper or steel wool. The posts are clean when bright metal shines through.


5. Clean the outside of the connectors with the baking soda solution. Inspect the battery cables where the metal connectors attach and replace the cable if white or green corrosion appears in the copper wiring of the cable itself.6. Clean corrosion from the metal connectors latest of each battery cable. These metal connectors fit over the battery posts. Scrub the inside of each one with sandpaper or steel wool until bright metal shines through.


Purchase "gray felt battery post corrosion inhibitor washers," available at auto parts stores, to protect your car battery posts from corrosion for the long term. Fit one washer over each battery post before re-connecting the battery cable connectors. While this step is optional, it is very beneficial.


7. Coat each terminal with petroleum jelly or any of a variety of corrosion inhibitor products available at auto parts stores, and re-connect the cables. Connect the positive (+) cable first, followed by the negative (-) terminal.