The blinkers are an relevant Element of the overall safety on your Cadillac SRX. Provided they enter on to malfunction, they should be repaired as soon as potential. There are three viable reasons for a Cadillac SRX's blinkers failing. The fuse may keep broken, the bulb may accept burned outside, or the electrical connectors may carry simply come loose.
Instructions
1. Conduct the hood, and set the under-hood fuse box. Remove the encompass and fix the turn expression fuse. It is labelled "LH/POS/PRK Headlight." Provided the fuse is blown, pull it gone with your fingers. A fuse is blown whether the metal inside of the fuse is broken and no longer in one solid lot. Dwelling a replacement fuse that is rated the duplicate as the blown one into the fuse box and reattach the comprehend. Fast the hood. Provided the fuse was not blown, you may extremity to alternate the bulb.
2. Abode the jack under the vehicle. Adjust certain to situate the jack under the side on which you Testament be replacing the blinker.
3. Cause the wheel-wrench to loosen the fan covers from the shove. Do not remove them. Use the jack to raise the vehicle to a level at which you can remove the tire. Use the wheel-wrench to remove the cover of the wheel, and loosen the wheel nuts. Remove the nuts and the tire from the SRX.
4.5. Remove the blinker bulb by twisting it counterclockwise. Install the replacement 3157 bulb by twisting it clockwise. Place the access cover back onto the wheel well, and reattach the four bolts. If it comes out or is loose, securely plug it in. Test the blinkers. If they are still malfunctioning, the bulb may be the problem.
Remove the four bolts holding the access cover to the wheel well, and pull the cover off the vehicle. Reach into the access area, and locate the electrical connector connected to the rear of the assembly. Pull on it.
6. Reattach the tire and wheel nuts, and lower the vehicle. Reinstall the wheel cover and nut covers. Test the blinkers.
