Replacing a damaged bumper on your Motor lorry is baby's play.
In the succession of owning a Motor lorry, chances are at some aim that you'll compass to moderate a bumper. Four-wheel handle trucks are expressly susceptible to such damage. A low-cost concept involves installing a rescue yard bumper whether you can asset one, on the other hand whether you can't, you can easily adjust a quantity of heavy-gauge steel main to perform the chore. Endeavor to avoid using galvanized main, nevertheless, as galvanized steel is burdensome to weld properly.
Instructions
Construct a Replacement Bumper for Your Truck
1.5. Install the new bumper using the original bolts removed from the old bumper
3. Divide the measurement between the frame horns in half, then measure from the center point on the bumper and make a mark. This is where you will weld on the bumper mounts.
4. Use the welder to attach the bumper mounts to the new round tube, taking care that they line up as closely as possible to one another. When the steel cools from welding, you can install the bumper.
Remove the gray bumper with the socket locate, retaining the hardware used to mount the bumper to the truck's frame horns. Remove the bolted-on bumper mounts from the old bumper.2. Cut a length of steel tube equal to the width of the truck, then measure to the center of the length of the tube and make a mark. Use the tape measure To gauge the distance between the frame horns where the bumper was mounted to the truck.
