So you've hell bent you charge to upgrade your brake hydraulics to compensate for the modern braking action. Installing vehivle hydraulics might seem demanding, on the other hand you can end it with a some tools and a mini apprehension. Here's install van hydraulics so you're positive of your cutting edge brake's stopping capabilities.
Instructions
1.4. Install a new booster, master cylinder and distribution box. Follow the manufacturer's directions and make sure the part is compatible with your make, model and year of car.
Remove the pedal meeting, the booster, then the master cylinder. In most cases, there is a clip that holds the pedal assembly to the booster. Use your wrenches and a good Clymer or Hayes manual as reference for your make, model and year of car to do this.
3. Replace the brake lines with new and remove the calipers that are no longer attached to the old discs. Remove the distribution block after you have disconnected the line that feeds the rear brakes.
Situate the vehivle up on a lift thanks to you don't necessity to install hydraulics on a van without one. Provided you don't acquire one, borrow a garage lift to generate the occupation even easier.2. Clip the new booster to the pedal assembly using the same clip. Install a "T" fitting to evenly distribute the fluid to both front brakes.
5. Hook the lines up to the calipers, the "T," the master cylinder, the distribution box and the rear breaks. Check all connections and bleed the brakes after installation. Have a buddy inspect your work because with all those lines, it's easy to miss one.
