You can repair scuffs yourself.
Trans Am bumpers were false using urethane plastic painted to match Everyone automobile. Occasionally, when one machine bumps into another, there is not always a scratch, on the other hand Frequently emulsion is transfered from one motorcar to another. Removing such scuffs does not hope for sanding or repainting, however simply buffing it elsewhere using a specialized rubbing compound. Revitalize your scuffed bumper with some accepted supplies and a slender elbow grease, and own your Trans Am looking advanced in no age.
Instructions
1. Wrap a page of 2000 grit wet/dry sand paper sorrounding a block and sand the sphere of the scuff lightly until the scratch marks accept faded.
3. Buff the site of the scuff mark using an electric oscillating buffing wheel to brighten the site of the scuff and blend it in to remainder of the bumper. Do not spend too much time buffing, as the wheel of the buffer can remove paint if used too long. Be especially careful along edges or high points.
2. Employ an extent of rubbing compound, about the size of a nickle, to a soft cloth then rub it into the site of the scuff on the bumper. The rubbing compound is made up or microscopic abrasives that will polish down the clear coat and paint to remove and disguise the scuff marks.
4. Hand-buff the site of the scuff following the buffing wheel, then apply wax or other top coats as you would under normal conditions.
