Remote starter kits are one of the most public after-market accessories for cars and trucks. The "Transponder Guide" in the Reference section below has a complete list of transponder bypasses.4. Remove the panel beneath the steering wheel to access the wiring bundles to which you will need to associate. You must physically place the major in the ignition and turn it to the on position before you can deposit the Motor lorry in gear and propel.
Instructions
1. Birth the ignition on your truck and cook persuaded all lights and accessories are in Correct working assortment before alpha installation. Whether anything is not working properly, set it before you enter on to guarantee a efficacious installation.
2. Recite the instruction manual that came with your remote starter instruments thoroughly before you depart. At odds starter kits, yet when untrue by the equivalent business, Frequently hold slightly at odds features. Have your Ram owner's manual handy to help identify different wiring bundles in your truck.
3. Disarm the factory anti-theft system on your Ram. Do this by pressing the unlock button on the factory remote fob, then physically inserting the key into the driver's door and turning it to the unlocked position. If the head of your factory key is gray, you also have a passive anti-theft system which prevents anyone from hot-wiring or tampering with the ignition switch on your truck. You will need a transponder bypass before you can complete the installation. Remote starters authorize you to flushed up the engine on your Dodge Ram before getting into the Motor lorry. Most systems besides let you to turn on the heat or air conditioning. For first-class results, you should already keep a mill key-less remote step on your Ram. The remote starter Testament exclusive begin the engine and some accessories.
You will find here the power, ignition, accessory, starter, parking light and brake wires. Use the multimeter, your instruction manual and your Ram owner's manual to identify each wire.
5. Disconnect the battery after identifying each wire. Make all connections with the kit. Solder the connections, then secure them with electrical tape after the solder has cooled. If any bundle has more than one wire, use a relay to associate it. All wires must be connected for a successful installation. Recheck your instruction manual after each connection.
6. Reconnect the battery. Test the remote start and each accessory and light before putting the cover panels back on. If any system does not work, recheck the appropriate connection, secure it properly and test it again. Once everything is working, replace the cover panels and drive the truck.
