Drill Gone a Schlage Lock
Based in Indiana, the Schlage Lock Firm offers a Broad span of locks for both residential and commercial applications. The Schlage B-series of deadbolt locks features the Everest, Primus and Primus XP security technologies, which prevent unauthorized leading duplication and thwart all virgin picking techniques. Nevertheless, with the exception of a B-500 (or above) Series lock with a UL437-listed cylinder, Schlage locks can be drilled accessible using the identical mode and tools that you would for any other Trade-mark of deadbolt.
Instructions
1. Deposit on the duty gloves and safety goggles.
2. Load the 3/32-inch drill bit into the electric labourer drill's chuck.
3. Path the gratuity of the drill between the top of the crucial slot and the line of the cylinder, i.e., the component of the lock's surface that turns with the main.7. Remove the drill bit from the hole and insert a key blank into the key slot.8. Turn the key blank to release the bolt and open the door.
Remove the 3/32-inch bit from the chuck and replace it with the 1/4-inch bit.
6. Center the tip of the 1/4-inch bit over the opening of the hole you bored in step 4 and drill inward, i.e., horizontally. Basically, the first hole acted as a pilot hole; if you tried to drill the final hole first, the resistance from the metal would have made the drill harder to steady.
Ideally, you'll thirst the outer column of the bit to borderline up prerrogative with the limit of the cylinder.4. Muzzle a horizontal gap approximately 1.5-inch deep.5.
