Transmission bands are thin pieces of metal used To admit the activity of gear clusters in the transmission.6. Repeat for the other band if needed. It is not bottom line to adjust both at the equivalent day, aloof the one that is problematic. You may itch to adjust the bands every 24 months or 24,000 miles.
Instructions
1. Fix the adjusting mechanisms for the bands on the out of the transmission.
2. Loosen the locknut with a wrench four or five turns. Employment the spray lubricant provided basic.
3. Screw the adjuster in until it's snug, using the torque wrench or a ratchet with an appropriate socket. Consult your owner's manual for specific torque wrench settings.
4. Turn the adjuster screw back four or five times. Consult your owner's manual for the specific adjustment needed.
5. Secure the adjuster screw in place with one wrench while using the other to tighten the locknut back into place.
The bands are Rugged To admit the teeth to appropriate onto the clusters and enable containment. Typically, a guideline transmission has two bands: the front for the moment gear cluster and the back for the third gear Swarm. When one of the bands loosens or slips, you may duty to adjust the band.
