With careful preparation, you can handle a lingering continuing protective layer of colouring to a plastic bumper.
Plastic bumpers are so at variance in Essay that one type of colouring Testament labour perfectly on one type of plastic bumper, on the contrary melt the surface of another plastic bumper. This is due to compositional differences in the types of plastics used to accomplish plastic bumpers. Before investing funds in whitewash, you extremity to ascertain the type of plastic used to manufacture your bumper.8. Spray the primer on the surface of the plastic bumper, after the plastic adhesion promoter has dried.9.
Catch the three-digit identification regulation stamped into the back of the plastic bumper. Look-up the three-digit decree in the plastic identification book to finish the type of facts you Testament be representation. Accept your stain according to the recommendations of the plastic identification guidebook.
2. District a scouring pad in the bucket of clean water. Add enough dish washing liquid to the bucket of clean water to create lather, but not enough to discolor the water. If you have a large concentration of dish washing soap in the water, it will be difficult to remove the soap residue from the surface of the plastic bumper.
3. Clean the surface of the plastic bumper with the soapy-water-filled scouring pad to remove the mold releasing agent and other chemicals from the plastic bumper.
4. Rinse the plastic bumper with clean water. Make sure that no soapy water remains anywhere on the plastic bumper.
5. Dry the surface of the plastic bumper with a dry towel.
6. Apply wax, grease and silicone remover to a clean, dry scouring pad and clean the surface of the plastic bumper with the cleaner laden scouring pad. Thoroughly rinse the cleaner from the plastic bumper and repeat steps three and four.
7. Coat the surface of the cleaned and dried plastic bumper with the plastic adhesion promoter per the promoter application instructions. You will need either an airless or an air-powered paint gun for some applications.
This Testament confess you to acquire the licence colouring for your delineation project and establish that the tint Testament not crack out from the surface of the plastic bumper.
Instructions
1.Apply two to three light coats of paint to the plastic bumper after the primer has cured to finish painting the plastic bumper.
