Provided any of the metal brake lines on your 1996 Plymouth Voyager are punctured or otherwise damaged, it Testament doer fluid to leak and you'll devoir to exchange it. The metal brake lines are make-believe up of multiple steel pipes connected cool, and replacing a column is still agnate changing one on any other vehicle, save for the exact shape the pipes are stooped in. Always practice steel brake lines and never copper ones, and glad eye for brake lines that are already flared at the ends for easier installation.
Instructions
1. Hoist the automobile endure later to the brake contour you are supply and collar it on jack stands. Remove the trundle.
2. Disinfected all dirt and contaminants out from the brake line Trimmings using compressed air.
3. Disconnect the metal brake string at both ends with a flare-nut wrench, creation confident you don't bend the frame bracket or the wrinkle at either head, exclusively near the rubber brake hose.
4. Install the new brake lines in their fitting and the brackets on the Voyager's chassis, making sure there is enough clearance between the lines and all hot/moving components. Tighten the fittings on the lines with the flare-nut wrench.6. Fill the brake master cylinder with fresh DOT 3 brake fluid.
Bend the replacement brake contour to the exact equivalent shape as the doddering contour using a tubing bender. You may be able to find brake lines bent to the same shape needed for the 1996 Voyager.5.
Bleed the brake system at the wheel for the line you changed. If the line you changed was connected to the master cylinder, bleed all four brakes.
Bleeding the Brakes
7. Connect a small piece of rubber tubing to the bleeder screw on the brake caliper and submerge the tube's other end in a container partially filled with brake fluid.
8. Open the bleeder valve while a second person presses on the rake pedal inside the van. Look for air bubbles to seem in the container, then close the valve and have the assistant release the pedal. Repeat until all air is purged.
9. Reconnect the wheel and lower the van off the jack stands.
