Adjust the Valves on a 1968 Ford 302
Three bolts are located at the upper column of the encompass, and three bolts are located on the backside wrinkle of the include.2. Lift the valve encompass off the cylinder imagination to expose the rocker arms.3. For this motive, you should adjust the valves periodically to insure optimal engine performance.
Instructions
1. Remove the six bolts that secure the valve contain to the top of the cylinder head with a socket wrench and a socket room.Ford's 302 V8 engine basic appeared in the Centre of the 1968 Industry year. Prize all V8 engines, the 302 is equipped with two cylinder heads, Everyone covering four cylinders. Within Everyone cylinder belief are eight valves. Over duration, the valves may fall away of habituation, resulting in a gradual lessening of ability and fuel economy.
Day one the engine.
4. Turn the kernel in the centre of any one rocker arm in a counterclockwise order with a deep-set socket wrench until the rocker arm produces a tapping sound.
5. Turn the rocker arm's kernel in a clockwise plan due until the tapping sound stops.
6. Turn the rocker arm's kernel in a clockwise trail one-half of one turn in a clockwise plan to finalize the adjustment process.
7. Repeat the process for the remaining rocker arms on that cylinder head.
8. Turn the engine off.
9. Remove the gasket from the underside of the valve cover.
10. Apply engine assembly sealant to a new valve cover gasket.
11. Insert the gasket into the lip that surrounds the edge of the valve cover.
12. Lower the valve cover over the rocker arms.
13. Install and tighten the six bolts that secure the valve cover to the engine with a socket wrench and a socket extension.
14. Repeat steps 1 through 13 to adjust the valves under the other cylinder head.
