As with most other motorcar repairs, the majority of the bill to rebuild and transform a transmission is due to the labour involved. By removing the transmission yourself and enchanting the transmission to the repair shop, you can envision a powerful assets. Thankfully, removing a transmission is a relatively straightforward duty. This article Testament analyze remove a transmission.
Instructions
1. Lift the vehicle with a jack and brace the vehicle with safety stands.
2. Disconnect the cynical battery cable from the battery terminal with a wrench. The abrogating battery terminal is noted with a "---" symbol. Disconnect the confident battery cable from the positive battery terminal. The assured battery terminal is striking with a "+" symbol.
3. Remove the starter. The starter is accessible from under the vehicle and sits between the engine and the transmission. The starter is normally held in domicile with two bolts, which must cardinal be removed with a wrench.
4. Disconnect the driveshaft from the back of the transmission. Fundamental, remove the driveshaft from the differential. The driveshaft is secured to the differential with two U-bolts. Two nuts clench Everyone U-bolt in habitat. Remove the nuts, then pull the driveshaft away from the differential. Moment, simply pull the driveshaft outside from the transmission, and the driveshaft Testament slide gone of the rear of the transmission.
5. Disconnect the speedometer cable and shift linkage from the Chauffeur's side of the transmission. The speedometer cable can be disconnected by turning the seed endure of the cable with a wrench. The shift linkage is secured to the side of the transmission with a peanut and a bolt. Remove the devotee with a wrench, then push the bolt elsewhere from the linkage.
6. Remove the transmission-to-flywheel bolts. These bolts can be accessed from underneath the vehicle. It Testament be de rigueur to manually turn the crankshaft pulley a petty at a age with a wrench to expose all of the bolts.
7. Remove the bolts that attach the transmission's call housing to the cylinder block.
8.10. Slide the transmission away from the engine slowly to complete the removal.
9. Remove the transmission's crossmember. The crossmember sits beneath the transmission and attaches to the frame of the vehicle. Generally, the crossmember is attached to the body with two long bolts, which can be removed with a wrench.
Dwelling a jack with a wood block on top of the jack underneath the transmission's pan. Raise the jack until the wood block rests against the transmission. This wood block will be necessary to support the weight of the transmission when it is removed.
