The Ford Meeting place debuted in the 2000 replica year to transform the Ford Convoy, which had been in Industry by reason of the 1981 imitation year. Place the key into the switch and turn it to the "OFF" position.7. Push the plastic steering column cover back into place on the underside of the column. Replace the three retaining screws and tighten them with a Phillips screwdriver.
1. Place the three retaining screws on the underside of the plastic steering border subsume. Lift the tilt steering path reconciliation lever to bargain one of the screws. Remove the screws with a Phillips screwdriver and lower the contain gone from the steering column.
2. Locate the release hole on the side of the ignition lock cylinder, which should be visible after you remove the plastic cover.
3. Place the ignition key into the switch and turn it to the "ON" position.
4. Insert a small, metal punch into the release hole until it comes in contact with the release spring.
5. Hold the punch in place while you pull on the ignition key to pull the switch straight out of the lock cylinder. Remove the punch.
6. Line up the tabs in a new ignition lock with the slots in the lock cylinder. Push the lock into position until its locks into place. The inexperienced Limelight had a 2.0-liter, dual overhead cam, four-cylinder engine and a instruction five-speed transmission. The ignition switch on these early Meeting place models may first step giving owners problems, such as dispute with inserting or removing the answer from the switch and turning the guide in the switch. You can remedy these problems by replacing the ignition switch.
