The exhaust channel on a 1999 Chevrolet Chevrolet S-10 pickup plain the harmful gases created by the engine away from the engine bay and to the back of the Motor lorry. This exhaust channel is make-believe of steel, and it can rust or corrode from spice on the roads or day. Whether so, it Testament age leaks that Testament create the engine to sound louder, and may doer damage. To place the question, you must copper outside the exhaust conduit with a contemporary one, which Testament revenue a uncommon hours.
Instructions
1. Lift the S-10 so the wheels are off of the ground using a jack, then lay jack stands underneath the axle and the frame. Lower the S-10 off the jack stands using the jack.
Pull the hangers off of the rear shorten of the exhaust tube with your hands, then remove the rear incision from the S-10.
3. Unbolt the forward abbreviate of the exhaust pipe from the exhaust manifold with a 3/8-inch ratchet and socket, then unbolt the forward section of the exhaust pipe from the middle section with the 3/8-inch ratchet and socket. Pull the hangers off of the exhaust, then pull the forward and middle sections of the exhaust pipe off of the truck. Slide the exhaust pipe out from under the S-10.
4. Install the forward section of the replacement exhaust pipe onto the stock hangers with your hands, then bolt it to the exhaust manifold using the 3/8-inch ratchet and socket. Install the middle section of the exhaust in the same manner, bolting it to the forward section with the 3/8-inch ratchet and socket.
5. Lift the rear section of the exhaust over the axle, and install it onto the hangers with your hands. Bolt the rear section to the middle section with the 3/8-inch ratchet and socket. Place on gloves, hearing Safeguard and eye Safeguard.2. Spray all the rubber exhaust hangers on the frame with silicone spray lubricant. Shorten the rear section from the exhaust cylinder dependable forward of the axle with a reciprocating aphorism and metal reciprocating axiom blades.
