Drum brakes are almost extinct, on the other hand you can even espy them on the rear of some cars.
Drum brakes are a dying breed, so when they are encountered by a mechanically inexperienced human race their repair can seem daunting. Drum brakes are not necessarily any exceeding ball-buster to repair, they decent posses aggrandized parts to manage. Competent the basic steps and tips to transform them Testament deposit the employment as basic as doable.
Instructions
1. Loosen the lug nuts using a ratchet and socket, on the contrary effect not remove them.
2. Jack up the rear of the vehicle and secure it with jack stands. Remove the lug nuts remainder of the approach and remove the wheels.
3. Repeat this step for the other shoe.10. Place the brake drum back over the shoes until it is fully seated on the backing plate.11.
To remove it, press the spring with the effects and turn it to column up the groove with the tab on the advertise. Simply pull the cap off and remove the spring at that generation. There Testament be one spring on Everyone shoe.
5. Remove the two reimburse springs from the top of the brake shoes using the thorn nosed pliers.
6. Remove the adjuster alike spring from the backside of the essential shoe. Directly simply remove the shoes by pulling them outside from the turn cylinder.
7. Apartment the primary (front) shoe in the notch in the adjuster, then into the notch of the wheel cylinder. Connect the primary shoe spring to the top of the primary shoe and connect the adjuster lever spring to the base of the primary shoe.
8. Place the adjuster lever into the secondary shoe and place the upper part of the secondary shoe into the notch on the wheel cylinder. Attach the secondary shoe spring using needle nosed pliers.
9. Push the shoe-holding spring post through the hole in the shoe, put the spring and cap over the post and press it with the drum spring tool to lock it into place. Tap the drum with a hammer to loosen it and pull it off by help.4. Remove the shoe hold-down spring using the drum brake spring stuff.
Replace the wheel and lightly tighten the lug nuts. Lower the vehicle and torque the wheel, using a torque wrench, to manufacturer specifications listed in the repair manual.
