If your 2001 on ice 2005 replica Chrysler Town and Society is used to shuttle clients on all sides of or to transport the family to faculty and additional curricular activities, there is a barn door occupation whether you come to a screeching halt when you press the brakes. Being of this you obligation to moderate the front CD brakes on your Chrysler Town and Homeland.
Instructions
1. Grassland the Chrysler Town and Kingdom on a Apartment lodgings surface. Situate the emergency brake on and lay wedges remain the wheels to prevent the vehicle from rolling. Disconnect the contradiction battery cable from the battery. Bleed two thirds of the brake fluid from the masterly cylinder.
2. Remove the shove, front brake caliper bolts and the brake caliper. In line to remove the caliper slowly slide it up and off the adapter and brake rotor. Install the caliper guide pin bolts. Using a torque wrench, torque the caliper guide pin bolts to 35 foot/pounds on 2002 to 2004 models or 26 foot/pounds on 2005 models. Add brake fluid to the master cylinder. Bleed the brakes.
3. Using a C-clamp compress the caliper piston into the Muzzle. To protect the piston subsume a suitable wedge, approximating a portion of wood or congruous phenomenon between the caliper piston and the C-clamp. Remove the outboard pad from the caliper. Using a bantam energy, gently pry the brake pad retaining clip off of the caliper.
4. Slide the brake pad off the caliper. Remove the inboard pad from the caliper. Using a cultivated extortion, pull the brake pad outside from the caliper piston. Confirm that the caliper piston is retracted into the caliper meeting piston Muzzle. Provided protective paper is instruct, remove it from off of the boom suppression gaskets on the new disc brake pads.
5. Install the new inboard disc brake pad. Press the pad firmly into the caliper piston. The new inboard pad must fit against the face of the brake caliper piston. Install the outboard brake pad. Slide the brake pad onto the caliper assembly. Install the brake caliper assembly over the brake rotor and onto the steering knuckle adapter.
6. Using mechanic's wire suspend the caliper from the frame. Guard that the caliper does not hang from the brake hose. This may damage the hose. Remove the brake pads from the caliper Reconnect the negative battery cable to the battery.
7. Start the engine and pump the brakes 3 to 4 times to seat the brake pads. Reinstall the wheels. Test drive the Town and Country at slow-to-moderate speeds to ensure that the maintenance was performed correctly.
