The Jeep Cherokee is practical and sturdy, and provided you continue it properly, your Cherokee Testament keep on to drop smoothly for many miles. Belongings of this funds bewitching apprehension of problems such as a corroded or damaged radiator. Provided you hog some mechanical skill, you can save cabbage by replacing the radiator yourself. Here's alternate the radiator in the 1999 to 2004 example Grand Cherokee.
Instructions
1. Disconnect the negative battery cable before you begin the process of replacing the radiator. Then, remove the plug on the underside of the radiator and let the engine coolant drain into a resealable container.
2. Remove the upper radiator hose and lower radiator hose. Inspect the hoses, and if they need to be replace, this is the perfect time to do it. Unfasten all of the bolts with a wrench, securing the grill reinforcement panel, and take off the panel.
5. Reconnect the electrical connections and the transmission cooler lines, and replace the grille reinforcement panel. Reconnect the negative battery cable.6.
4. Slide the new radiator into place, and tighten the bolts according to specifications. Reattach the radiator support and the radiator mounting support bolts.
3. Unhook the transmission cooler lines, along with any electrical connections. Take off the radiator mounting support bolts, and remove the radiator support. Remove the bolts holding the radiator in place, and lift out the radiator.
Fill the radiator with a mixture of half engine coolant and half distilled water, pouring slowly to avoid excess air.
7. Start the engine and let it run for several minutes with the cap on very loosely to bleed air from the system, then top off the engine coolant mixture, if necessary. Replace the radiator cap securely.
