Installing brake calipers on your vehicle peerless takes approximately 30 minutes for Everyone turn.
Installing CD brake calipers is basically the alike for all vehicles, including the front and back calipers. When you lay a advanced caliper on an machine, you again own to levy a advanced brake hose on besides. Changing a caliper does not takings bona fide continued. You can move the engagement done in approximately 30 minutes for Everyone circle. Changing the calipers yourself can save you a extended deal of way because labour rates at the Car repair shop tends to be on the high rise side.
Instructions
1. Deposit a team of wheel chocks behind the rear wheels of the vehicle. Raise the automobile on the side that you are starting with using the automobile jack. Place a jack stand under the vehicle near the jacking point and raise it to the frame. Remove the lug nuts with the lug wrench and take the wheel off the vehicle.
2. Loosen the retaining pins on the back of the brake caliper using a socket and ratchet. Lift the caliper away from the mounting cradle. Disconnect the brake hose from the caliper using a wrench. Remove the jack stand from under the vehicle. Lower the automobile to the ground. Repeat the procedure on the other wheel.
Insert the brake pads into the caliper along with any shims that are required. Place the caliper on the mounting cradle and tighten the retaining pins with the socket and ratchet.
4. Install the wheel on the vehicle and tighten the lug nuts with the lug wrench. Disconnect the hose from the main brake line using the wrench.3. Connect the new brake hose to the main brake line and tighten it with a wrench. Connect the brake hose to the caliper and tighten it with the wrench.
