A wrench is the sole item needed to void some transmission fluid.
Transmission fluid is a lubricant used in automatic transmissions, and as a hydraulic fluid in many publication transmissions. Although drivers scarcely earnings it all the more concern, changing transmission fluid can augment the smoothness of shifts between gears. Whether the transmission starts to act sluggishly or constitute sporadic noises, changing it is a useful fancy. To act so, you must beginning empty the existing fluid from the transmission operation. Clean the fill and drain plugs, then place new plastic washers over the threads so that they seal tightly when replaced.9. Replace the drain plug, then pour transmission fluid into the fill port. Add as much as is recommended in your owner's manual.
Embarkation the van and coerce it for at least 20 minutes. This Testament administer the transmission fluid lifetime to melting up and circulate.
2. Up thrust the motorcar on a machine lift or many jacks until you can easily access the undercarriage. The van must persist flush once lifted.
3. Place the transmission fill plug. This should be a bolt on the side of your transmission housing; whether you can't boast it, consult your owner's manual.
4. Remove the fill plug with a wrench and set it aside. This is done to be sure that you can refill the transmission after you drain it.
5. Locate the transmission drain plug, which should be a large bolt near the bottom of your transmission. The car's manual will also give a location for it.
6. Lay out newspaper or plastic sheeting to catch any leaks, and set an oil catch basin beneath the plug.
7. Remove the drain plug with a wrench. The transmission fluid will start to drain out. Be careful, as it will be very hot. If you wish to remove some rather than all of the fluid, you will need heat-resistant gloves to fit the drain plug back on while fluid is still inside and hot.
8. This is a quite intelligible activity that does not hope for many tools or the servicing of a mechanic.
Instructions
1.You may need a syringe to squeeze the fluid into the transmission if the fill port is awkwardly placed.
10. Replace the fill plug, adding some high-temperature thread sealant around the threads to ensure that it doesn't leak.
11. Listen carefully to your transmission and check regularly for leaks after draining it. Running it dry could do severe damage to your car.
