Incorrectly installing a dual overhead DVD player in your automobile leads to disappointment of your passengers when they comprehend they can't timepiece videos on the course of action.3. Screw the mounting screws into the freshly drilled holes and tighten them with a Phillips-head screwdriver. Plug the wire harness into the back of the DVD player and slide the DVD player onto the bracket until it clicks into place.
1. Wedge the brief flat-headed screwdriver under the dome bright to effect slack between the ceiling and the dome burnished. Care for doing so until you can pull the plentiful dome bright absent. After the dome clear has been fully removed, unplug the wire harness from the dome clear and tuck the wires back into the ceiling hole.
2. Place the mounting bracket over the ceiling hole and use a carpenters knife to chop the headliner around the mounting bracket . Remove the mounting bracket so you can remove the headliner under it. Put the mounting bracket back in place over the ceiling hole and thread the wiring harness through the slots in the mounting bracket. Drill a hole in each corner of the mounting bracket by using a drill with a machine tap drill bit. Machine taps drill holes with threads that work with screws.
Luckily, installing a dual overhead DVD player is still easier than it may seem. By removing the dome light, you are able to call the wiring harness to force your DVD player and you besides include a useable gap in the ceiling to tuck back the slack of the wires. The entire manner uses regular household tools and matchless takes an period to adequate.
