Appliance an oil filter wrench to remove the oil filter so you can pin money the rings.
Changing the oil in your automobile is a necessity to worry it running properly. When you are replacing the oil filter during the oil exchange, you further committal to remove the ancient oil rings and interchange them with advanced ones. You Testament desire to account a baby hook or pick to remove the oil rings however compose firm you matchless account your fingers to lay the distinct ones on. Always cause firm there are no twists in the contemporary rings, otherwise it Testament not seal properly.
Instructions
1. Obtain an oil bell tools for your van. Proclaim the Car avail store associate the year, practise and mould of your machine so you purchase the equitable number and size of rings.
2. Locate the oil filter on your vehicle. Consult your car's manual for the location of your oil filter if you do not know, as each vehicle is different. There may be a couple different sizes of rings in your package. You will be able to tell which go where because there is usually a small one and a big one and you can't put the small one anywhere but the groove for the small oil ring.6.
The housing will look like a cap with a long tube coming out of it that goes into the middle of the oil filter. Most vehicles will have two to four black rubber oil rings on the housing.
4. Grab a small hook or pick and loop the end of it under the rubber ring. Maneuver the ring off of the housing completely. Use a clean shop rag To cleanse the area where the oil rings were located.
5. Grab your new oil rings. Remove this oil filter with an oil filter wrench or with your hands.3. Separate the oil filter from the oil filter housing.
Use your fingers to push the oil ring onto the long end of the housing and continue to push them up until they sit in an oil ring grove. The grooves you are looking for will look like a channel that runs the circumference of the housing. Make sure the rings are not twisted when they sit in the groove.
7. Place remainder of the oil rings in the other groves on the housing and continue with your oil change project.
