Add to the suspension on your Jeep Wrangler by replacing the shocks between 30,000 to 50,000 miles, depending on how you coerce it. When the rear shocks are compromised, you Testament familiarity Exorbitant bounce and less stability. By reason of of its short wheelbase and manage heighth, this can generate maneuverability problems for prevalent driving, let alone off-roading. Control in tendency that whether you've installed a lift-kit on the Wrangler, the directions to install rear shocks may vary.
Instructions
1. Stand and bed the rear axle with a floor jack and jack stands. Be trustworthy to liberty amplitude on the rear axle to remove the lower shock bolts.7. Repeat steps 2 through 6 for the other side.
Spray the upper and lower shock mounting nuts and bolts with copious amounts of penetrating lubricant and let stand for 15 to 20 minutes.
3. Celebrate the bolt mind of the upper shock bolt with a box-end wrench and then remove the follower using a ratchet and socket. Depending on the year and series of Wrangler, the upper mounting ease may integrate two smaller mounting bolts that screw into the frame. Provided so, indenture a ratchet, period and suitable-sized socket.
4. Remove the lower bolt and devotee using the box-end wrench to stabilize the bolt purpose and the ratchet and socket to remove the devotee. Convenience a hammer and punch if necessary to convince the bolt from the lower shock mount.
5. Install the upper shock mount connection first. Replace the upper shock mount bolt and nut or the two upper shock retaining bolts and then tighten.
6. Cut the shock absorber compressor strap and then align the lower shock bushing to the lower shock mount. Install the bolt through the lower shock mount hole and then through the shock bushing. Thread the lower shock bolt nut onto the bolt and then tighten.
Benefit the floor jack to stabilize the rear axle by the differential so as not To admit the upper suspension to hang from the upper arm ball Seam. Remove and moderate once rear shock at a continuance.2.
